Skip to content

PLDT Full Admin Access Credentials (RP2602 RP2613 RP2627 RP2646 and RP2684)

image_pdfimage_print

The latest as of (April 2020) full admin credentials to PLDT Home Fibr routers version RP2627, 2646 and RP2684 will be posted here along with the step-by-step instructions to assist you in accessing your PLDT router.

Advertisement

Video Tutorial

Credentials (RP2646 & RP2684)

FIBERHOMESUPERADMIN ACCOUNT

Router address: 192.168.1.1/fh

Username:f9!6b1e1rhO3es~u!p@e#r$a%d^m*i(n
Password:s)f_U+h|g{u@5h2o1q0b1l
FIBERHOMESUPERADMIN ACCOUNT CREDENTIALS TESTED APRIL 2020 @ AN5506-04-FA MODEL

ADMINPLDT ACCOUNT

Router address: 192.168.1.1/fh

Username:adminpldt
Possible Password/s:z6dUABtl270qRxt7a2uGTiw
6GFJdY4aAuUKJjdtSn7dC2
3UJUh2VemEfUtesEchEuSHA
1234567890
pldt1234
IF YOU HAVE CHANGED IT BEFORE TRY YOUR OLD PASSWORD
ADMINPLDT ACCOUNT CREDENTIALS TESTED APRIL 2020 @ AN5506-04-FA MODEL
ADDITIONAL NOTES:

Credentials (RP2627)

FIBERHOMESUPERADMIN ACCOUNT

Router address: 192.168.1.1/fh

Username:fiberhomesuperadmin
Password:sfuhgu
FIBERHOMESUPERADMIN ACCOUNT CREDENTIALS TESTED FOR RP2627 FIRMWARE

ADMINPLDT ACCOUNT

Router address: 192.168.1.1/fh

Username:adminpldt
Possible Password/s:6GFJdY4aAuUKJjdtSn7dC2x
ADMINPLDT ACCOUNT CREDENTIALS TESTED APRIL 2020

Credentials (RP2613)

FIBERHOMESUPERADMIN ACCOUNT

Router address: 192.168.1.1/fh

Username:admin1234
Password:admin1234
FIBERHOMESUPERADMIN ACCOUNT CREDENTIALS FOR RP2613 FIRMWARE

ADMINPLDT ACCOUNT

Router address: 192.168.1.1/fh

Username:adminpldt
Password:6GFJdY4aAuUKJjdtSn7dC2x
ADMINPLDT ACCOUNT CREDENTIALS FOR RP2613 FIRMWARE

Credentials (RP2602) (Tested on HG6245D)

FIBERHOMESUPERADMIN ACCOUNT

Router address: 192.168.1.1/fh

Username:f~i!b@e#r$h%o^m*esuperadmin
Password:s(f)u_h+g|u
FIBERHOMESUPERADMIN ACCOUNT CREDENTIALS FOR RP2602 FIRMWARE

ADMINPLDT ACCOUNT

Router address: 192.168.1.1/fh

Username:adminpldt
Password:z6dUABtl270qRxt7a2uGTiw
ADMINPLDT ACCOUNT CREDENTIALS FOR RP2602 FIRMWARE

Instructions

  1. Open a web browser, type in the address bar 192.168.1.1/fh
  2. Enter the FIBERHOMESUPERADMIN credentials (see table above) then log in.
  3. Click on the debug switch upon login and look for Web-Admin Switch toggle to enable then hit the apply button.
  4. Logout from the FIBERHOMESUPERADMIN account.
  5. Type once again on the URL 192.168.1.1/fh
  6. Enter the ADMINPLDT credentials (see table above) then log in.
    • NOTES:
    • If you get an error of invalid password/credentials make sure you are copying without any space from the table above.
      • Check if your software version is the same with the credentials you’re copying.
      • For HG6245D, check the RP2602 credentials above. If the adminpldt doesn’t work try resetting your modem by pressing on the small pinhole beside the WPS button on your router then try again.
    • If you see “Someone is already logged in“, simply restart your modem.
    • If you have a different version or router other than mentioned above it is not guaranteed to work. Feel free to ask on the forums on this website or comment below (signup / login using Facebook or Google account).

This may or may not work for you since PLDT changes the credentials once in a while so if this worked for you leave a comment below or if you have discovered a new credentials that worked for you feel free to share it to FST Community by commenting below, or posting a thread in the forum or through YouTube comments or Facebook.

Advertisement

26 thoughts on “PLDT Full Admin Access Credentials (RP2602 RP2613 RP2627 RP2646 and RP2684)”

  1. Hi. Need help po. “For HG6245D, try resetting your modem by pressing on the small pinhole beside the WPS button on your router.” after this is done, what will I do next? Badly need those lan ports.

    1. Hi Julie Ann, after nyan try logging in with the credentials:
      Username: f~i!b@e#r$h%o^m*esuperadmin
      Password: s(f)u_h+g|u

      Usernames: adminpldt
      Passwords: z6dUABtl270qRxt7a2uGTiw
      But follow the steps carefully including yung may /fh sa dulo.

  2. Paulito-Jesus-Abiog-Ferrer

    Credentials (RP2602) (Tested on HG6245D) <– working po ung tuts, na disconnect kmi since january, then my bro paid the bill and after 1 month na reconnect, i already configure it before. di ko na bantayan ung ginawa ng tech. nawalan me ng access. then after few weeks of research, i found your site and use the tuts here. working na po sila salamat will book mark this site for future update

  3. Symon-Torcelino-Marco

    i have this version (an5506-04-fa) Ano po pass ng SV:2631 Ayaw ksi gumana ng 2613 then gumana yung sa Credentials (RP2602) (Tested on HG6245D) pero nung enable ko yung telnet swtich saka web admin switch walang nangyayare bumabalik sya sa pagka disabled.. ni log out ko then ni log in ko ulet wala nangyare patulong nmn po

    1. Hi Symon! Try clearing cache on your browser or using a different browser kasi may conflict minsan sa chrome / firefox and vice versa.

    1. Hi Gladys! Have you enabled the adminpldt and are you logging in with /fh appended at the end of your router ip address? eg. 192.168.1.1/fh ?

  4. Sir question. Nagawa ko naman po lahat at na on ko ung web switch pero wala pa din access to enable lan ports 2 3 and 4. wala pong broadband settings

  5. Hello po! Naka-log in po ako superadmin at admin pero po yung sa superadmin, blank page lang. yung may white and blue box pero walang text. Di ko po alam kung paano i-troubleshoot. Thanks po.

  6. Hello po! ask ko lang po nakapag sign in na po ako nung for adminpldt sa HG6245D tapos nag karoon po ako ng access pero nung nag enable po ako ng LAN ports tapos nag restart po ako. hindi na po ako ulit maka sign in sa dun sa adminpldt kahit naka enable naman po ung web switch

    1. Hi Gengie! Did you change the adminpldt password or were you asked to change the password? Also make sure to login using /fh and see if gumana. Also, ano ang nirestart mo computer or router? If computer, try restarting the router baka hindi nag logout yung session properly.

    1. Hi! Are you logged in as adminpldt account or “full admin”? Kasi sa default “admin” wala talagang mac filtering kaya need yung full admin. Also what “device model” yung router nyo?

    1. Hi! Simply login using the default admin account not the adminpldt. Then upon logging in you’ll see the Device Information similar to this image: https://www.freesoftwaretips.tech/technology/how-to-change-wifi-password-pldt-home-fibr-2020/#If_you_didn8217t_see_that_configuration_prompt then look at the “software version” and “device model” then try which credentials would work that’s appropriate with your “software version” Eg. RP2624, etc. and device model.

  7. hello sir paturo nman please. gumana nman lahat after follwing your instructions pero pag restart ko ng modem tapos log in sa admin pldt gamit ang new password, ayaw mag log in ang error ay: “admin account unavailable!” ano po dapat gawin nito, sir? pls reply, thank you.
    RP20602
    HG6245D

    1. Hi Gian! Make sure to re-enable the admin switch in the fiberhomesuperadmin. Every shutdown/restart ng router nag aauto disable ang admin account or adminpldt kaya need sya i-reenable.

      1. thank you sir nagreply kayo. kapag ni re-enable ko ang web admin switch tapos apply sir bumabalik lang sa “disabled”. ibig sabhin ba nito sir every time mag off ang router, reset tapos ulitin nman ang whole process then setup ng mga kailangan ko na settings? baka po merong permanent solution para dito? pls reply po, thank you.

        1. Hi Gian! No need to do all settings halimbawa inenable mo na ang Lan Ports so permanent na yang ma eenable unless mag update yung router ng software version (automatic ididsable ulit ng PLDT by default lahat ng default settings) kaya need mo ulit gawin pero bihira lng naman pag update ang software version like once or twice a year. For the web admin switch, bumabalik talaga sya sa “disabled” part sya ng router kaya need mo ire-enable para makalogin ka as full admin pero hindi ibig sabihin na nagdidisable ito mawawala na yung mga kinonfigure mong settings!

Leave a Reply

Your email address will not be published. Required fields are marked *